220V KADA 853B BGA Preheat Station Hot Air Thermostat Heating Station Preheater. Power supply voltage: 220V / 50Hz.Temperature range: 100 °C - 380 °C. Heating element: Ceramic heating element. Preheat area: 0.18mm³ / min(tuyere).
KADA853B hot air preheating station with rapid heating, continuous and reliable, hot and cold air self-selection and so on. First, KADA-853B preheat Taiwan Features.The use of advanced quartz infrared heating body heating fast, high efficiency, dedicated IC can accurately control the temperature range can be set at 100. Built-in temperature sensor, temperature and real temperature digital tube display.
Speed heating, just ten seconds up to 380 degrees. With 850D, 852d + hot air and Taiwan and 942,936 anti-static soldering station to use, on the large chip class (BGA), etc. Compact appearance, easy to carry. For electronics, electrical appliances, electric fast, maintenance, etc.
PCB board industry, preheating / heating / component desoldering. For heat shrinkage, drying, paint removal, in addition to stick, thaw, warm-up, disinfection, welding. Blowing tape plastic components, vibration device, the tail plug inserted within the seat is not deformed, blowing wire does not blister, remove the shield.
Does not change color, blown BGA chip is not easy to break. Set to be processed PCB board components in the central air outlet. According to the size of components, circuit board thickness, PCB board tin melting.Point, set temperature note the temperature setting is very important to master, or likely to cause PCB damage, the temperature should not be too high. Otherwise PCB board deformation, Severe will be scorched, otherwise the temperature is too low will not take down the components.
Turn on the power switch and heating switch, the temperature rises and quickly reach a constant, when the component pin melting point of the solder, the. Note: So when the PCB board of the components of the pin tin points are in the vicinity of the melting point, then please do not immediately remove the PCB. Board, you should first turn off the heating switch, the machine blowing cold air to be on the PCB board temperature drop To room temperature.
Thank you for your support. We are not responsible for undeliverable address. Dear friend, your happy is very important to me!We stand behind every product we sell. You can enjoy top-quality product and high-quality services from us, Trust me that you will have a pleasant shopping experience in here. We will be happy to assist you.
We would try our best to serve you with any question / problem. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Soldering/Desoldering Equipment & Accessories\Soldering Guns & Irons".The seller is "weixia-parts" and is located in this country: CN. This item can be shipped worldwide.