Hot Air Rework Soldering Station 500? Desoldering-Gun Station with Adjustable Ho

  
Hot Air Rework Soldering Station 500? Desoldering-Gun Station with Adjustable Hot Air Gun Holder, 3 Air Nozzles, 700W. B - US style with ground plug. 10.24 x 6.5 x 5.83 inches. 6.5 inches x 10.24 inches x 5.83 inches. Heats Up Fast and Easy to Use? /±2 °F, big LED digital displays to show precision temperature for the hot air gun, and it has a temperature memory function if turn off the station at 400? It will auto heat up to the 400? Very convenient and simple to use, improving desoldering work efficiency. Airflow (F1- - F8) is adjustable and air output is stable for you to do different work, with moderate volume so no excessive noise. Blowing PCB will not make it blister. It's good for safely removing BGA-IC, keeping pins intact, and Much more safe and reliable. Comes with three kinds of nozzles (big 8mm, medium 5mm, and small 3mm), can be easily replaced. Made by upgrading the ceramic heating-core, handle housing is made of flame-retardant material. The heat gun handle will enter the overheat protection and automatically cut off the power to prevent the handle temperature from being too high. The air gun automatic function is a safety measure that ensures the heat is automatically cut off when the air gun is in its holder. NEWACALOX 858D desoldering station has a fuse and uses an insulated triangular plug and has used the correct ground power cord. 2 Adjustable Hot Air Gun Holder? The hot gun stand can be installed according to personal usage habits. And the additional heat gun holder can help you adjust and fix the position of the air gun at work.

It can be adjusted up and down to reach the position. And comes with nozzles storage function. Help to hold the pcb/solder wire when soldering. For PCB desoldering /Heat shrink tube/.

A rework station equipped with advanced functions, essential accessories and tools. This station comes with PID Temperature Stabilization, Standby Mode, Digital Temperature Calibration, and more. You can use this station for applications including but not limited to SMD soldering, SMD hot air rework.. Helping you accomplish your work is worth more than anything to us. In the package, we included in a pack of essential tools to help you complete your task.

1 x 858D Hot air Soldering Station. 1 x Hot air gun handle 1 x Handle stand. 2 x Tweezers(fine tip curved, fine tip straight). 1 x Desoldering Pump 1 x Power cord. 3 x Nozzles(5mm, 8mm, 10mm) 1 x IC Extractor.

1 x mini Pliers 1 x Mini Screwdriver 1 x instruction. 1 x heat gun stand 1 x nozzles holder. Heat gun stand install way. Adjustable Hot Air Gun Holder.

The additional heat gun stand can help you adjust and fix the position of the hot gun at any time during welding work. It can be adjusted up and down to reach the position where you are satisfied with the hot air gun that needs to work. And completely free your hands.

Can place used air gun nozzles, to keep the workbench tidy and avoid scalding. The handle needs to be placed on the support upwards, to avoid the hot air that cannot be discharged and damage the handle. Multi-component precision design, offer precise temperature control. Fast heat dissipation, compared to ordinary soldering stations can reduce 10% energy consumption. Tips: transformer away from the output wire, the output wire with protective cover is safer. This stand have drilling holding holes, you can install it according to your own hands usage habits. 5,6 hole: heat gun. 7,8 hole: heating stuff. Jacks need to be one-to-one to avoid grounding failure. It adopts aviation metal and outer layer injection molding, one-time forming, have good toughness and anti-oxidation. The hot air gun is now detachable for easier replacement, you can simply swap out the hot air gun instead of soldering a new heating element onto the gun. When you put the handle back on the holder, the station will also enter stand-by mode.

When you turn off the station at 400 degree centigrade, when you turn on next time, it will auto heat up to the 400 degree centigrade. Also, it have PID (Proportional-Integral-Derivative) Technology Program to provide a stable temperature. Anti - static type material box + delta ground wire.

Material box with safety Non-slip base. We guarantee against any defective or misrepresented products.

This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Soldering/Desoldering Equipment & Accessories\Soldering Guns & Irons". The seller is "be-stars" and is located in this country: US.

This item can be shipped worldwide.

• Brand: JLX factory
• Item model number: N-858DUS-AGR
• Part Number: NEW-858DUS-11PC
• Style: 858DUSAGR rework station
• Plug Format: B - US style with ground plug.
• Power Source: Ac
• Item Package Quantity: 1
• Display Style: LCD
• Product Dimensions: 10.24 x 6.5 x 5.83 inches
• Display Type: LCD
• Number of Handles: 1
• Item Weight: 4.25 pounds
• Batteries Included?: No
• Item Dimensions LxWxH: 10.24 x 6.5 x 5.83 inches
• Batteries Required?

  : No

• Model: N-858DUS-AGR
• Manufacturer: JLX factory
• Is Discontinued By Manufacturer: No
• Included Components: Bag
• UPC: 7445040286213
• EAN: 07445040286213