Weller WHA3000P Digital Hot Air Station 120VAC, 700W, 122 to 1022°F with Built-In Turbine. Self-contained benchtop unit features powerful internal air source for maximum portability. Suitable for demanding repair tasks involving complex fine pitch surface mounted components. Set and read temperatures are digitally displayed on bright, clear LCD.Temperature and air flow are independently controlled. Controlled output maintains set temperature regardless of air flow setting. Automatic mode allows up to ten separate programs to be stored in memory. Each profile features a unique air temperature / air volume / process time, allowing for process repeatability. Special ionizing circuit assures hot air is static-free to protect sensitive components.
Compatible with optional Type K thermocouple to measure temperature on specific areas of PCBs. Foot switch includes three positions: Off, Hot Air, Vacuum. "Stop and Go" tool holder automatically switches hot air pencil to "standby" mode, reducing air flow but maintaining operating temperature. Temperature Range: 122 to 1022°F (50°C to 550°C).Temperature Accuracy: +/- 86°F (+/- 30°C). Vacuum Pressure: - 0.6 Bar. Air Flow Volume: 5 to 50 l/min. Dimensions: 9.5 x 10.6 x 6.7 in. (240 x 270 x 170 mm). The Weller WHA3000P Digital Hot Air Station with Built-In Turbine is suitable for difficult repairs on circuit boards with fine pitch surface mounted components. A thorough design concept combines maximum process safety with ease of use and technically advanced application solutions. A comprehensive range of accessories adds to the possible uses of this repair workstation. The hot air temperature at the hand-piece can be adjusted over the range of 50°C to 550°C (122 to 1022°F). The air flow rate is generated via an internal turbine and can be adjusted between the range of 5 l/min to 50 l/min. Hot air temperature and air flow rate are digitally controlled. The vacuum necessary for lifting the component is integrated into the nozzle system and can be activated to suit the operating mode chosen.
Two operating modes are provided. 1 The Manual operating mode can be used for manual work at the hot air temperature and air flow rate set.
Hot air and vacuum can be activated using the foot switch, manual remote control console or directly on the control Panel. 2 The Automatic operating mode establishes a program with a 3-step time/temperature profile, and can be used in conjunction with the WHP3000 Pre-Heat Plate available as an accessory. The parameters for hot air temperature, air flow rate, temperature of the optional WHP3000 Pre-Heat Plate and vacuum function can be adjusted separately and can be saved as a Rework Profile for the specific application. The repair station can also be complemented with the optional matched WBH3000S Circuit Board Holder for X-Y alignment and a stand with Z-axis guide for the hot air hand-piece.
1 - WHA3000P Hot Air Station with Built-in Turbine. 1 - HAP3 Hot Air Iron. 1 - NQ30 Hot Air Nozzle. 1 - AKT30 Safety Stand. 1 - Nozzle Removal Tool.
1 - Main Power Cord 120VAC. 1 - Product CD-Rom (Operating Instructions including WHA Control Software). Virgin Islands and American Samoa. Due to international voltage requirements, please ask us prior to purchasing to confirm your product will operate correctly in your country.
This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Soldering/Desoldering Equipment & Accessories\Soldering Guns & Irons". The seller is "testequipmentdepot" and is located in this country: US.
This item can be shipped worldwide.